OIL AND GAS APPLICATIONS


IMPORTANCE OF UTILIZING AN EFFECTIVE BIOCIDE

Frac Water – For typical water treatment of water from non-potable water sources, mix 5 US gallons of ASBio Clean with 995 US gallons of frac water to 2.5 ppm FAC or alternatively add enough ASBio Clean to obtain a 0.1-0.5 ppm FAC residual after biocide load burden to mitigate and retard the growth of non-public health microorganisms such as anaerobic bacteria, aerobic bacteria and sulfate reducing bacteria to protect fracturing fluids, polymers and gels.

Sour Wells - For typical well treatment, slug dose 168 US gallons at 500 ppm FAC of ASBio Clean [this product], or alternatively 42-420 gallons depending upon well parameters and conditions, into the well bore on a daily or weekly or monthly basis to maintain control of unwanted odors and non-public health microorganisms, reduce hydrogen sulfide gas and restore well integrity.

Produced Waters - For typical produced water and flow back water treatment, mix 21 US gallons of ASBio Clean with 979 US gallons of produced water to 10.5 ppm FAC or alternatively add enough ASBio Clean to obtain a 0.5 ppm FAC residual in the produced or flow back water after biocide load burden to retard the growth of non-public health microorganisms.

Heater Treaters, Hydrocarbon Storage Facilities & Gas Storage Wells – For typical storage facility treatment, mix 126 gallons of ASBio Clean ] at 500 ppm FAC or alternatively add enough ASBio Clean to obtain a 0.5 ppm FAC residual into the water phase of the mixed hydrocarbon/water system to retard the growth of nonpublic health microorganisms, control unwanted odors and the formation of hydrogen sulfide, and reduce corrosion of the storage tanks.

Water Flood Injection Water- For typical water flood injection water treatment, mix 21 US gallons of ASBio Clean with 979 US gallons of injection water to 10.5 ppm FAC or alternatively add enough ASBio Clean to obtain a 0.1-0.5 ppm FAC residual to retard the growth of non-public health microorganisms and control slime in pipelines.

Oil and Gas Transmission Lines- For typical transmission line treatment, slug dose 42-420 US gallons at 500 ppm FAC of ASBio Clean into the transmission line on a daily or weekly basis to control unwanted non-public health microorganisms, such as SRB’s, reduce microbiologically influenced corrosion (MIC) and remove the slime and associated sessile bacteria which can degrade pipeline integrity.